Flat roofs
Rubber roofing (EPDM)
EPDM is a synthetic rubber membrane laid over a flat roof, usually in one sheet. It is used on garages, extensions, porches and dormers. A roofer prepares the roof deck, fits the membrane, and finishes the edges and flashings.
Post your roofing job to Premium membersTell us about your job once. Premium roofers who cover your area can then contact you.Describe your job
What this covers
Typical price. £80 to £160 a square metre fitted
What the job covers
- Fitting an EPDM rubber membrane on a flat roof
- Covering a garage, extension or porch roof in rubber
- Replacing an old felt or leaking flat roof covering
- Fitting edge trims, drips and flashings
- Repairing tears, seams and leaks in a rubber roof
What is involved
EPDM stands for ethylene propylene diene monomer, a synthetic rubber. On a flat roof it is supplied as a large sheet that is cut to the size of the roof and stuck to the deck with adhesive. Because the sheet is large, there are few seams, and the edges are finished with trims and flashings. Many people ask for it simply as a rubber roof.
The roof deck, which is usually timber boards, has to be sound, clean and dry before the sheet goes on. The roofer may strip the old covering first and replace any boards that are damp or rotten. Ask whether the price covers stripping and removal, insulation, edge trims, drips and flashings.
Published guides put EPDM at £80 to £160 a square metre fitted. As examples, one guide puts a rubber roof on a single garage at £1,000 to £1,400, and a double garage at £2,200 to £4,000. Flat roof repairs usually cost £150 to £800, so a repair may be sensible if the roof is otherwise sound.
A roofer can repair tears, split seams and leaks on a rubber roof, and should say whether the fault is local or whether more of the roof is affected. Do not go up on the roof yourself. Keep the written quote, any guarantee, and the make of the membrane so that repairs can be matched later.
Choosing someone for the job
Ask what the price covers: stripping the old roof, repairing the deck, insulation, edge trims and flashings. Ask which make of EPDM is being fitted, and what guarantee you receive in writing. Ask whether the work is done in one visit and whether the price changes if the deck needs repair. Ask whether the firm belongs to a trade body or scheme, and look the business up on that body's own register.
Worth reading first:
Related jobs:
Common questions
What is EPDM roofing?
EPDM is a synthetic rubber membrane. It is laid on a flat roof in a large sheet, stuck down with adhesive, and finished at the edges with trims and flashings. It is often called rubber roofing.
Can EPDM be laid over an old roof?
It depends on what is underneath. The deck has to be sound, clean and dry. Sometimes the old covering is removed first, and boards that are damp or rotten are replaced. Ask the roofer to explain and to photograph the deck.