Roof repairs
Dry ridge, dry verge and roof pointing
The ridge is the line along the peak of the roof where two slopes meet, and the verge is the edge of the roof at a gable end. Both are often bedded in mortar, which can crack and loosen over the years. A roofer can re-bed or repoint the mortar, or fit a dry system that holds the tiles with mechanical fixings instead.
Post your roofing job to Premium membersTell us about your job once. Premium roofers who cover your area can then contact you.Describe your job
What this covers
Typical price. £500 to £2,500 for a dry ridge system
What the job covers
- Replacing a mortar ridge with a dry ridge system
- Fitting a dry verge system along a gable edge
- Re-bedding and repointing ridge and hip tiles
- Repointing the mortar along a verge
- Replacing cracked or missing ridge tiles
What is involved
Ridge and verge tiles take the full force of wind and rain. From the ground you may see ridge tiles that sit unevenly, gaps or cracks in the mortar, pieces of mortar in the gutter, or a ragged line along a gable edge. Water and wind can get under the tiles from these gaps, so it is worth having them looked at before the damage spreads.
Repointing means raking out loose mortar and filling the joints again. Re-bedding goes a step further: the roofer lifts the ridge or hip tiles, clears the old bed and sets the tiles back on fresh mortar. Published guides put ridge repair or repointing at £200 to £1,200, depending on how many metres of ridge or hip there are and how easy they are to reach.
A dry ridge system fixes the ridge tiles to a batten with clips and screws, using no mortar bed, and many systems include vented units that let air move through the roof space. A dry verge system works in a similar way along the gable edge, with the tiles held by fixings and an end cap. A dry ridge system typically costs £500 to £2,500 all in, depending on the length and size of the roof. A dry verge is priced after a look at the roof.
This is work at height, so it is usually done from scaffolding or an access tower. Do not go up on the roof yourself. Ask for photographs of the ridge or verge before and after, keep the written quote, and note which system or product was fitted so you can refer to it later.
Choosing someone for the job
Ask whether the job is repointing, re-bedding or a dry system, and why that suits your roof. Ask how many metres of ridge, hip or verge the price covers, and whether replacing damaged tiles is included. Check whether scaffolding or an access tower is in the quote, and ask for the guarantee in writing. Ask whether the firm belongs to a trade body or scheme, and look the business up on that body's own register.
Worth reading first:
Related jobs:
Common questions
How is a dry ridge different from a mortar ridge?
A mortar ridge sets the tiles on a bed of mortar. A dry ridge fixes them to a batten with clips and screws, so there is no mortar bed to crack. Your roofer can explain which suits your roof and tiles.
How do I know if my ridge tiles need attention?
From the ground, look for tiles that sit unevenly, gaps or cracks in the mortar, and mortar pieces in the gutter or on the ground. A roofer can look closer and tell you whether repointing, re-bedding or a dry system is the better route.